Kastas Sealing Technologies
Firma
   
Language Selection
Informazioni Tecniche
Hydraulic Sealing Elements
Pneumatic Sealing Elements
Guide Elements
Guide Elements Operating Principles
Materials Used In Guide Elements And Their Characteristics
Guide Element Height & Width Calculations
O’rings
General Installation Information
Storage Conditions
  
/ Informazioni Tecniche / Guide Elements / Guide Element Height & Width Calculations
Guide Element Height & Width Calculations

GUIDE ELEMENT HEIGHT&WIDTH CALCULATIONS

The elastic deformation of the components under the load (deflection of the guide element, bending of the shaft, extending/shrinking of the cylinder) creates an angular deviation between the piston and bore or rod and gland cap. Calculation based on the parallel axis generally gives wrong conclusions.
In this respect it is vital to take this into consideration when calculating the guide elements.

Geometric consideration  (angular deviation, additional force applications to the system, etc) should be taken into account when calculating the transverse load applied on the guide element and also the elastic deformation of all components involved (deflection of the guide element, bending of the shaft, stretching of the cylinder, etc). In this respect while making
the calculations a safety factor (generally around 2) should be identified.

In long slender cylinders the permissible transverse force is limited by the bending strength of the rod and other factors. The general assumption that about 10% to 15% of the hydraulic force is applied as a transverse load. 

 
It is not required to have metal to metal contact with piston-bore and rod-gland cap. That is why under the transverse forces, maximum angular deviation for the guide element should be less than the permissible sealing gap defined in the catalogue.
 GUIDE LENGTH CALCULATIONS IN GUIDE STRIP

L = Guide strip length (mm)             D = Nominal diameter of piston (mm)
d = Nominal diameter of rod (mm)    a = Cross-sectional thickness of the guide strip (mm)


 


 
 

 





 






Privacy Policy
Azienda
Informazioni Relative a Kastas
R&D
Capacità Produttiva
Gestione Qualità
Vendite e Logistica
Responsabilità Aziendale
Carriera
Prodotti
Tenute Idrauliche
Guarnizioni Pneumatiche
Elementi di Guida
Elementi di Tenuta Statici
Elementi di Guida Speciali
SmartSeal Custom-Made Machined Seals
Settori Industriali
Macchine Agricole
Macchine da Costruzione
Presse Idrauliche
Idraulica Mobile
Industria Mineraria
Metal Processing
Plastic Injection Moulding Machines
Informazioni Tecniche
Hydraulic Sealing Elements
Pneumatic Sealing Elements
Guide Elements
O’rings
General Installation Information
Storage Conditions
News & Video
News
Eventi & Fiere
Download
Video
Kastas Zoom
Newsletter
Contatto
Sede
Kastas Europe GmbH
Filiali
Distributori
Modulo Contatto
© All rights reserved 2020
Asersoft